Call now:

  • Phones: +389 (0)48 422-330, 422-331
  • Fax: +389 (0)48 421-292

 

 

Our other products are:

OCTOESTER

Octoester is a polyester moulding compound (premix) using unsaturated polyester resin as a binder, styrene as a cross linking agent, and various inorganic powder materials and chopped glass fibers as fillers. The basic classifiction of Octoester is made by DIN 16911 and there are two types: type 801 (standard) and type 803 (selfehtinguishing). The sommercial names of these Eurocomposit products are Octoester-11 and Octoester-11S. The standard colour of octoester is white, and by customers request it could be produced in other colours too.

Application:

Octoester-11 and Octoester-11S are used for manufacture of technical and constuctive parts in various branches of electrical engeneering, mechanical engeneering, chemical and automobile industry, and also for manifacture of technical product of consumer goods.

Processing:

  1. Direct moulding
  2. Transfer moulding
  3. Injection moulding

Moulding conditions:

  1. Temperature 150 - 155°C
  2. Pressure……5 - 10 N/mm˛
  3. Time…..40 - 50 sec/mm

 

OCTOFEN 9V

Octofen 9V is a phenol-formaldehide moulding compound ising phenol-formadehide resin (resol type) as a binder, and non-alkali glass fiber as a reinforcement. Standard colour of Octofen 9V is light to dark yellow. This moulding compound by its properties, corresponds to standard GOST 20437-75.

Application:

Octofen 9V is used form manufacture of constructive and electrical insulating parts with increased strength, as well as form manufacture of parts form thermic protections of rocket motor etc. The parts manufactured form this moulding compound are stabile in the temperature range from - 60°C to 200°C, as well as conditions of tropical climate.

Processing:

  1. Direct moulding
  2. Transfer moulding

Moulding conditions:

  1. Temperature 150 ±5 °C
  2. Pressure……30-50 N/mm˛
  3. Time….........60-75 sec/mm

Oktofen MB-N (trade mark PF-MB-7261)

Oktofen MB-N is phenol-formaldehide moulding compound using phenol-formaldehide resin (novalock type) as a binder, and non-alkali glass fiber and mineral flour as reinforcements. Standard color of Oktofen MB-N is white to dark yellow. Before moulding it is recommended to make preforming of the moulding compound.

Application:

Oktofen MB-N is used for manifacturing of electro-insulating parts with an increased strength as well as parts form thermi protection. The parts made of this moulding compound are stabile intemperature ragne of - 30 °C to 130 °C, a s well as in tropical climate conditions.

Procesing and moulding conditions are the same as Octofen 9V

OKTOCARBOFEN (trade mark PF-CV)

Oktocarbofen is phenol-formaldehide moulding compound using phenol-formaldehide resin (resol type) with special ablative performances as a binder and carbon fibers as reinforcement. Standard color of Oktocarbofen is black. Before moulding it is recommended to make preforming of the moulding compound.

Application:

Oktocarbofen is used form manifacturing of constructive parts with an increased strength as well as form thermic protection of rocket motors and e.t.c. The parts made of this moulding compound are stabile in temperature range of - 60 °C to 1500 °C, as well as in tropical climate conditions.

Processing:

  1. Direct moulding

Moulding conditions:

  1. Temperature 150 ±5 °C
  2. Pressure……30-80 N/mm˛
  3. Time….........60-75 sec/mm

We produce various moulded parts on the following hydraulic press units:

  • 100 t, with tool opening of 340 x 500 mm
  • 200 t, with tool opening of 630 x 680 mm
  • 400 t, with tool opening of 900 x 1000 mm.

The glass and carbon fiber content could be agreed with the customer.